Netgear GS408EPP-100NAS
Easy-Mount 8-Port Gigabit Ethernet PoE+ Smart Managed Plus Switch
Sorry, this product is no longer available, Please contact us for a replacement.
Overview:
The NETGEAR Easy-Mount Switch Family Overview
The NETGEAR Easy-Mount Switch allows you to put more PoE/PoE+ ports Virtually Anywhere™ with its unique mounting system.
The Easy-Mount Switch family comes with a full set of software features such as traffic prioritization, VLANs, QoS and PoE power allocation.
Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for maximum power savings.
GS408EPP-100NAS Product Video
Easy-Mount and Low Noise Operation
Deploy your PoE/PoE+ switch closest to your PoE/PoE+ devices and put your PoE/PoE+ ports exactly where you need them.
Install your ports up in the ceiling, strapped to a pole, mounted under a desk or tabletop. If you wish you also can rack mount the GS408EPP switch on a 19-inch standard rack. You can even rack mount 2 GS408EPP switches back to back in a single 1U.
Thanks to the active fans the GS408EPP is a silent switch, well below offices ambient background noise.
PoE/PoE+ Support
Power-Over-Ethernet (PoE) option available for powering IP Security Cameras, VOIP phones, wireless access points, and other PD-powered devices.
With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices.
Easy-Mount "Virtually Anywhere" Mounting System
The innovative mounting system gives you the flexibility to place the Easy-Mount Switch in locations where other switches will not go. Whether it's directly on a wall, strapped to a pole, under the meeting table in a conference room or in a server closet, vertical or horizontal, flat or perpendicular, the unique mounting system allow you to control exactly how and where your ports and cables are deployed.
Networking Management Features
The Easy-Mount Switches can go beyond plug-and-play connectivity with additional Switch networking features, allowing businesses to segment the network with VLANs or prioritize voice and video traffic with QoS. IGMP Snooping allows for optimized multimedia delivery and port trunking adds redundancy to uplinks and servers. Setup and configuration is simple using the web browser-based configuration GUI.
NETGEAR Warranty
Easy-Mount switches are backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.
Lifetime Next Business Day Hardware Replacement.
ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days.
ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
Features:
Hardware
- One-step Instant VPN for business protection and remote or site-to-site secure access (Remote VPN available with Windows clients only)
- 8 PoE/PoE+ ports (802.3af, 802.3at) with 124W PoE/PoE+ Budget
- Virtually AnywhereTM Easy-Mount system allows for:
- On a Wall.
- Under a Tabletop/Desktop.
- On a rectangular or round pole.
- Up in the ceiling
- In a standard 19-inch rack
- Multi-directional power cable can be routed outwards or downwards
- Internal power supply (simple power cord from switch to outlet)
- LED lights can be turned off for non-distracting placement next to a TV
Performance
- 192KB packet buffer memory (dynamically shared across only used ports)
- 16 Gbps non-blocking fabric (bandwidth)
- 4 Priority queues
- Weighted Round Robin (WRR) priority queuing
- 4K Media Access Control (MAC) addresses with 48-bit MAC address
- 128 Multicast groups
- 64 VLANs
- Jumbo frames up to 9k packet size supported
VLANs
- IEEE 802.1Q VLAN tagging
- Port-based VLANs (physical)
Multicast
- IGMP snooping, v1, v2, and v3
- Blocking of unknown multicast traffic
Link Aggregation
- IEEE 802.3ad - Static LAGs
- 2 LAGs with max 4 members in each LAG
Quality of Service (QoS)
- Port-based rate limiting (ingress and egress)
- Port-based QoS
- IEEE 802.1p COS
- IPv4 DSCP
- IPv4 ToS
- Weighted Round Robin (WRR)
Network Security
- Broadcast, multicast, unknown unicast storm control
- DoS attacks prevention
Reliabiltiy, Performance and Troubleshooting
- Port mirroring both on ingress and egress traffic
- Jumbo frame support
- Broadcast storm control
- Cable Diagnostics
- Loop Detection
- Energy Efficient Ethernet(IEEE 802.3az) compliant
- Broadcast, multicast, unknown unicast storm control
Management
- Password management
- Web browser-based graphical user interface (GUI) for advanced configuration and management
- ProSAFE Plus Configuration Utility (PCU) for multi-switch management (requires Windows PC)
- Firmware upgrade via HTTP (Web GUI) or TFTP (Plus Utility)
- Config file transfers (backup, restore) using web browser-based management GUI or Plus Utility
- Port mirroring; many-to-one port mirroring
- Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by default)
- Short cable power reduction
- Auto power-down
- Broadcast, multicast, unknown unicast storm control
- DHCP client
NETGEAR Warranty
- This product is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.
- Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions.
- ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
- ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
Additional Tech Support offers are available for purchase. Click here for more information
Specifications:
Product Number |
GS408EPP |
Model Description |
8-port Gigabit Web Managed Easy-Mount Switch w/8-port PoE/PoE+ |
Gigabit Ports |
8 |
PoE/PoE+ Ports / PoE Budget |
8 PoE/PoE+, 124W PoE Budget |
Max MAC entries |
4K |
Buffer Size |
192kb |
Link Aggregation/Port Trunking |
Manual Static LAG |
Number of LAGs & Number of Members |
2 LAGs with max 4 members in each LAG |
Supported Multicast Groups |
128 |
Auto-Denial-of-Service Prevention |
Yes |
Port Mirroring Max Number of Source Ports Allowed (Many to 1) |
1 |
Jumbo Frame Support |
Up to 9K packets |
Max Power Consumption (Watts) |
5.8W (non-PoE) 148W(PoE) |
Acoustic Noise Level @ 25° C (dBA) |
26.9 dBA |
VLAN (# supported) |
64 |
Number of priority queues |
4 |
Power Supply |
Internal: 100-240VAC, 50-60Hz, 2A max (power cord localized to country of sale) |
Fan(s) |
Active Fan |
Operating Temperature |
0° to 50° C |
MTBF (hours) |
2,715,369 hours |
Electromagnetic compliance (A or B) |
A |
Dimensions (W x D x H) |
380 x 100 x 43.2 mm (15 x 3.9 x 1.7 in) |
Weight |
1.6 kg(3.53 lb) |
Documentation:
Download the Netgear GS408EPP-100NAS (PDF).