NETGEAR WNDAP350
ProSafe Dual Band Wireless-N Access Point

NETGEAR WNDAP350 - ProSafe Dual Band Wireless-N Access Point

Sorry, this product is no longer available, replaced by the WAC720-100NAS.

More pricing below, click here!

Overview:

Advanced Speed and Range with Comprehensive Internet Security

Up to 15x the speed and 10x the coverage of 802.11g networks
Concurrent operation in 2.4 GHz and 5 GHz radio band for maximum wireless throughput
Backward compatibility with 802.11a, 802.11g and 802.11b network devices
Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support
Support for 802.3af PoE for optimal placement of access point

Features

Up to 15x the speed and 10x the coverage of 802.11a, 802.11g networks
Operation in 5 GHz radio band to avoid interference from 802.11b or 802.11g network devices
Concurrent operation in 2.4 GHz and 5 GHz radio band
Backward compatibility with 802.11a, 802.11g and 802.11b network devices
Integrated 802.3af PoE eliminates extra cables and enables optimal placement of the access point
Comprehensive SNMP functionality for advanced network management
Deploy wireless coverage over large areas with point-to-point and point-to-multipoint bridging via Wireless Distribution System (WDS)
Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support
Plenum-rated for safe and convenient placement above drop-down ceilings
Metal case includes Kensington lock slot for anti-theft
Internal antennas factory-optimized for maximum RF performance
Antenna take-offs enable optional accessory antenna attachment for 2.4 GHz operations
Lifetime hardware warranty

The NETGEAR Difference

Concurrent dual band operation on PoE power
Internal antennas optimized for maximum performance
Intuitive GUI for easy configuration
Attachment points for optional accessory antennasLifetime Warranty

Specifications:

NETGEAR WNDAP350 Specifications
Standards	IEEE 802.11n, 2.4 GHz and 5.0 GHz IEEE 802.11a 5.0 GHz IEEE 802.11g, IEEE 802.11b, 2.4 GHz IEEE 802.3ab Gigabit Ethernet WMM - Wi-Fi Multimedia prioritization Wireless Distribution System IEEE 802.3af Power over Ethernet (PoE)
Physical Specifications	Dimensions: 32 x 190 x 124 mm (1.25 x 7.5 x 4.9 in) Weight: (.56 kg) 1.2 lb Plenum rated Flash: 16 MB RAM: 128 MB Slots for wall or ceiling mounting
Safety and Electromagnetic Conformance	FCC Part 15 Subpart B and Subpart C CE EN 60950, EN 300328-2 v1.1.1, (2000-07), EMC EN 301489-1 v1.2.1, (2000-08), and EN 301489-17 v1.1.1, (2000-09), EN 55022(B), CISPR 22(B), AS/NZS 3548(B)
Environmental Specifications	Operating temperature: 0° to 55° C (32° to 131° F) Operating humidity: 90% maximum relative humidity, non-condensing
Physical Interfaces	One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support Power adapter: 12V DC, 1A; plug is localized to country of sale Five (5) LEDs: Power, 10/100/1000 Mbps, Link/ACT, 2.4 GHz band, 5.0 GHz band One (1) console port with standard RS-232C interface with DB-9 male connector Two (2) reverse SMA antenna connectors for accessory antennas Note: Not recommended for use with ProSafe Antennas ANT2405, ANT2409 or ANT24D18
Power over Ethernet Required	Up to 12.8W Typical Maximum Transmit Power: 20 dB Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance
Security	Wi-Fi Protected Access (WPA, WPA2) Wired Equivalent Privacy (WEP) 64-bit, 128-bit encryption and 256-bit encryption IEEE 802.1x RADIUS authentication with EAP TLS, TTLS, PEAP Wireless access control to identify authorized wireless network devices MAC address authentication ; up to 256 entries VPN pass-through support Secure SSH telnet Secure Sockets Layer (SSL) remote management login Multiple SSID: 8 per band (16 total) Block SSID Broadcast VLAN Support: 17 VLAN Rogue AP detection Client isolation for Hotspot applications Kensington locking slot for physical security
Network Management	Remote configuration and management through Web browser, SNMP or telnet with Command Line Interface (CLI) SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB, SNMP v1, V2c
Advanced Wireless Features	Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Simultaneous wireless bridge and access point mode Wireless Distribution System (WDS) Adjustable transmit power control (TPC) from 100 mW down to 0 mW WMM support for traffic prioritization WMM-PS support for saving client battery life DHCP Server for clients
Warranty	Access point: ProSafe Lifetime Warranty Power supply: 3-year warranty
System Requirements	2.4 GHz/5 GHz 802.11n draft specification adapter or 2.4 GHz 802.11b/g wireless adapter or 5 GHz 802.11a wireless adapter Microsoft® Windows® Vista™, XP, 2000, 98, Me, Mac® OS, UNIX®, Linux® Internet Explorer® 6.0, Mozilla Firefox 1.5 We recommend using this product with the RangeMax™ Dual Band Wireless USB 2.0 Adapter (WNDA3100)
Package Contents	ProSafe Dual Band Wireless-N Access Point (WNDAP350) Ethernet cable Wall-mount kit Installation guide Resource CD 12V, 1A power adapter, localized to country of sale

Diagram:

NETGEAR WNDAP330 Diagram

Documentation:

Download the NETGEAR WNDAP350 Datasheet (PDF).

Pricing Notes:

Pricing and product availability subject to change without notice.

Netgear Products

NETGEAR Business Central

NETGEAR Cloud WLAN Mgmt 1 AP 12 months

#WM1AP1YL-10000S
Our Price: $69.99

Call a Specialist Today! 877-352-0547

NETGEAR WNDAP350 ProSafe Dual Band Wireless-N Access Point